Recuperation unit is specially design for Vent Vapour Recovery By Absorption process.
The non-condensable gases with mostly air get into the system during the processes like extraction, drying and distillation. These gases can cause damage to the system, and thus, have to be vented out. For this, an adsorption system is attached through which the vent gases are passed through. In this adsorption system, there is vegetable oil that completely adsorbs the solvent traces in the gases. A regular check on the oil has to be carried out for the presence of volatiles and as per the requirements, has to be rejected when these levels are visible.
In an LM Extractor, the material enters through an inlet hopper and is swiftly saturated with miscella. Read More
Meal De-Solventizing & Toasting
The meal exiting the extractor contains 26-30% solvents by weight. The meal is thus heavily. Read More
The purpose of the meal cooling section is for cooling the de-solventised and toasted material. Read More
"Miscella" is the industry term used for the oil/solvent mixture that leaves the.. Read More
Solvent vapours mixed with air depart the extractor. Solvent vapours mixed with water. Read More
Recuperation Unit For Final Solvent Trap
Recuperation unit is specially design for Vent Vapour Recovery By Absorption process. Read More