The white cottonseed which comes after ginning plant which does not remove whole of cotton so that's why we called white cotton seed and that white cottonseed contains 10 – 15 % Lint over. Earlier it was not possible to remove this lint effectively and easily at high capacity. But now days, It is possible to remove lint with very efficiently because of Delinting plant of "Ferro Oiltek (P) Ltd." Which not only developed the Delinters but also provide it to industry at very high quality Delinting & Decorticating Processing plant.


The raw material of CSP plant is the white cotton seed, which comes after ginning plant, the first operation in CSP plant is the seed cleaning operation, so first seed goes into the seed cleaner here stones, dust, metal pieces, foreign particles & most important un gin cotton separate from white cotton seed, and cleaned seed send it into the next operation i.e. Delinting process. In Delinting process we cut lint over the white cotton seed by first cut & second cut Delinting operation, so in this way we get 1st cut & 2nd cut lint as a products.

As we know, "if we want to increase our product demand in market so we have to produced that quality of products which market demands & market demands quality products".

So the next process is the lint cleaning operation here the lint will clean & then send to pressing & packaging.

After Delinting operation we get delinted seed from bottom conveyor & it move forward to decorticating process, here the first process is Hulling & separation process, so delinted seed fed into the High capacity decorticator with basket separator by this operation at the end we get hulls, large hulls & uncut seed, & product meat.

First large hulls & uncut seed mixture is send into the density separator here hulls & uncut seed separate from each other & also meat which is sticky with hulls that also remove by beating operation.

Second hulls ducting to next process that is hulls purification process & uncut seed recycle back to hulling process. In hulls purification process hulls from decorticating section & hulls from density separator it contain some % of oil (meat), & this recovery is done by hulls purification process, so at the end of hulls purifier we get zero oiled hulls & meat.