Bulk Material Handling Systems for Process Plants
Build a preliminary conveying concept in minutes. Define your material, duty and route, watch the system respond live, and send a structured design brief directly to Ferro Oiltek engineering.
Integrated bulk material movement for process plants
Ferro Oiltek engineers conveying systems around the material, required capacity, route geometry, operating environment and downstream process. Our Material Handling Division supports individual conveyors and complete plant-wide systems for oilseeds, meals, powders, biomass and industrial bulk solids.
Build a preliminary material route
Adjust the inputs below. The schematic and technical brief update automatically and will be attached to your quotation request.
System requirements
ConfigureFree-flowing; use gentle handling to limit splits and seed damage.
Quick oilseed bulk-density reference
Preliminary system concept
Live previewOne division. Every transfer challenge.
Gentle, continuous movement for oilseeds, bags and bulk materials across long horizontal or inclined routes.
Controlled transfer, feeding and dosing of powders, meals and semi-free-flowing materials in compact spaces.
Enclosed, dust-controlled movement of bulk solids with multiple inlet and discharge arrangements.
Efficient vertical lifting of seeds, grains, meals and granules with application-specific bucket selection.
Flexible enclosed transfer of powders and granular products using pressure or vacuum conveying principles.
Explore rotor lift equipment for material transfer.
Hoppers, feeders, magnets, weighing, dust collection, controls, supports and process equipment integration.
Material, capacity, hours and operating conditions.
Set horizontal run, lift and transfer requirements.
See preliminary route data and system direction instantly.
Send the complete brief for engineering and quotation.
Send your conveyor concept to our team
Your configuration will be converted into a structured technical brief and sent through Ferro Oiltek’s existing enquiry system.
- Preliminary route and duty summary
- Material and construction requirements
- Engineer-led equipment selection
- Quotation and next-step consultation
Connect material handling to the complete process
A bulk-material-handling project starts with the movement required between receiving, storage, preparation, extraction, finished-product handling and dispatch. Different stages may require different equipment. The system designer above captures a preliminary route; the final layout must also account for surge capacity, feed consistency, access, supports and process interfaces.
Information for equipment selection
For domestic and export projects, include the installation country, site layout, operating hours, utility information and applicable project requirements in the technical brief. Separate confirmed information from assumptions. The engineering team can then review individual conveyors and the interfaces between machines without treating a preliminary online calculation as a certified design.
Related equipment and process stages
Screw conveyors | Bucket elevators | Redler and bulk-flow conveyors | Pneumatic conveying | Oilseed preparation | Solvent extraction
Project questions
Where should an oilseed conveying project start?
Map receiving, cleaning, preparation and the extraction or pressing route, then specify the material at each transfer. Whole seeds, prepared material, meal and hulls can require different handling arrangements.
Can the same brief cover non-oilseed bulk materials?
Yes. Identify the actual material and its handling characteristics in the enquiry. Compatibility, construction and safety requirements must be reviewed before a recommendation or quotation.
Portuguese
Russian